Sanitärtechnik-Rechner für Wasserversorgungsplanung, Entwässerungssysteme, Rohrdimensionierung und Druckverlustberechnungen nach internationalen Normen.
12 Rechner
Calculate pressure drop in water piping systems
Size domestic hot water boilers and storage
Calculate water supply fixture units and pipe sizing
Calculate drain, waste, and vent pipe sizes based on IPC Chapter 4 standards. Determine DFU totals, branch drain sizes, building drain sizing, and vent configurations.
Calculate sump pump capacity based on drainage area, soil percolation, and water table conditions per IPC Section 1113. Determine pump size, basin requirements, cycle rates, and battery backup needs.
Calculate recirculation pump sizing, energy costs, and payback period for instant hot water delivery systems per ASHRAE 90.1 and IPC Chapter 6.
Size backwater/check valves for sewage backup protection per IPC Section 715, ASME A112.14.1, and CSA B181.1. Calculate valve type, installation requirements, cost analysis, and maintenance schedules.
Design pressure boosting systems with tanks
Calculate water storage tank capacity
Size grease traps for commercial kitchens
Calculate required insulation thickness for pipes based on heat loss and temperature control
Analyze water distribution networks using Hardy-Cross method for flow rates, velocities, and pressures